Creator anchor

Pozyx Creator/Individual units 69

The Pozyx anchor is meant as a reference unit in the Creator series. It can support two-way-ranging (TWR) based positioning. For 3D positioning, at least 4 anchors are required.

In stock. Shipped in 1 week.

  • Plug

157.10 175.00 175.0 USD

€ 135.00

This combination does not exist.

Creator anchor

Overview

The Pozyx anchor is meant as a reference unit in the Creator series. It can support two-way-ranging (TWR) based positioning. For 3D positioning, at least 4 anchors are required. The anchors are powered through USB or a barrel jack connector. The anchor can be reprogrammed to behave as a tag. The anchor does not need an Arduino to work.


  • On-board ultra-wideband transceiver

  • On-board pressure sensor

  • Operating voltage 3.3 V

  • IP20 casing


On board interfaces


  • I2C. Communication with the Pozyx anchor means of I2C (SCL and SDA pin) and two optional interrupt pins (pins 2 or 3).
  • Micro USB. The micro USB can be used for two purposes: Firstly, for updating the Pozyx firmware in case new features are provided by us. Secondly, it can be used to connect (and power) the anchor to a computer.

Board

Microcontroller STM32F4
Micro USB For firmware updates
LEDs 4 for general purpose + 2 for UWB connectivity
Optional GPIO pins 4
Onboard 3.3 V regulator For automatic power selection from battery, Arduino or USB
Size 6 cm x 5.3 cm
Weight 12 g

Ultra-wideband

Transceiver Decawave DW1000
Chip antenna Onboard
Accuracy Up to 10 cm
Frequency range 3.5 - 6.5 GHz
Communication Up to 6.8 Mbps
Range Up to 100 m

Motion sensors

Pressure sensor MPL3115A2

More products for you

Creator kit

The perfect kit for prototyping.

More info
Developer tag

The Developer Tag lets you position and track things in real-time with high accuracy.

More info